Arteriors Arden Sconce/Ceiling Mount
Description
The captivating spirals found in sacred geometry inspired the spiralshaped Arden. Its organic form projects light in between layers, allowing it to play on the vintagestyle brass surface. This clever design can be used as a flush mount or as a sconce. Damprated, although limited covered outdoor conditions may affect finish. The finish will vary Handcrafted of brass Uses one 60watt bulb Canopy, 7"Dia Approx. 16"Dia x 8.5"T UL listed Includes hanging hardware Professional installation is recommended Wipe clean Imported Weight, 5.6 lbs Boxed weight, approximately 11.9 lbs Entryway Lighting Sizing Guidelines:If a single Fixture is being installed, it should be about 1/3rd the height of the door. If 2 fixtures are being installed (one on each side), they can be slightly smaller, about 1/4th the height of the door. Fixtures should be installed at eye level; the center of the light source should be roughly 5.5amp;150;6 feet off of the ground. Garage Lighting Sizing Guidelines:Exterior fixtures illuminating the garage should be 1/4th to 1/3rd the height of the garage door.
You may also like
loading
Discover more
