Description
The CSE 6" Cathedral ceiling LED downlight is the perfect solution for both new construction, remodel, and retrofit installations into cathedral/ vaulted ceilings. The 30° angled high-output light pattern is produced by integrated optics within the lens that bends the light from the cathedral ceiling directly down. It is also an excellent solution for illuminating walls (wall wash) when installed onto a flat ceiling. No need to assemble and use unsightly track light systems. Dimmable to 10% with an LED compatible dimmer switch. At only 6mm thick, and with a driver that can be remote located to any distance, this flush mount can-less downlight can be installed at most any location, including zero clearance areas. No venting is required resulting in reduced air flow and reduced heat loss. These lights do not break fire barrier; they are IC rated and can be installed in direct contact with insulation. Light output outperforms all other lights in its class. The 9-watt series (60W incandescent equivalent) produces 1000 lumens. All downlights are available in 5 color temperatures: 2700, 3000, 3500, 4000, and 5000 Kelvin. There are 9 different trim colors that blend nicely to various ceiling colors. Since the CSE downlights are damp rated, installing into colored soffits/porches making for a very clean and unobstructed appearance. Made in the U.S.A. Flush mount 6mm thin design easily installs over a standard junction box without using templates for difficult hole cutting through ceiling material. 9 trim color options to fully compliment final design finishes. No need for the expensive gimble style lights that require integrated extrusive housings. For zero clearance installations, you can install the driver away from the downlight to any distance using Class II wire connection. High output illumination at 9 watts, 1000 lumens at a cost savings of utilizing only 0.1 amps AC. Fully dimmable to 10% with an LED compatible dimmer switch. Damp rated for open shower and exterior covered installations. Screw-in Edison base and torsion spring kit included for 6"" housing retrofit installations. Warranty: 5 years / 50,000 hours. Fixture Dimensions: 0.25 inches high x 7.20 inch diameter."
You may also like
loading
Discover more
